public VoxelVolume Volume {get;}
Public ReadOnly Property Volume As VoxelVolume
public VoxelVolume Volume {get;}
Public ReadOnly Property Volume As VoxelVolume
{
var x_max = voxelLayer.GetVolumes().Max(v => v.GetVolumeSize().X);
var y_max = voxelLayer.GetVolumes().Max(v => v.GetVolumeSize().Y);
var z_max = voxelLayer.GetVolumes().Max(v => v.GetVolumeSize().Z);
//Get the dimensions of just one volume
var dimensions = voxelLayer.GetVolumes().FirstOrDefault();
//Get the dimensions of the volume associated with the selected variable
var dimensions2 = voxelLayer.SelectedVariableProfile.Volume.GetVolumeSize();
}
{
await QueuedTask.Run(() =>
{
//Use the SelectedVariableProfile to get the slices currently in the TOC
//via its associated volume
var volume = voxelLayer.SelectedVariableProfile.Volume;
var slices = volume.GetSlices();
//Do something... e.g. make them visible
foreach (var slice in slices)
{
slice.IsVisible = true;
volume.UpdateSlice(slice);
}
//expand the slice container and make sure container visibility is true
voxelLayer.SetSliceContainerExpanded(true);
voxelLayer.SetSliceContainerVisibility(true);
});
}
{
//Use the SelectedVariableProfile to get the slices currently in the TOC
//via its associated volume
var volume = voxelLayer.SelectedVariableProfile.Volume;
var slice = volume.GetSlices().FirstOrDefault();
var slice2 = volume.GetSlices().First(s => s.Id == my_slice_id);
}
{
await QueuedTask.Run(() =>
{
if (voxelLayer.Visualization != VoxelVisualization.Volume)
{
voxelLayer.SetVisualization(VoxelVisualization.Volume);
}
voxelLayer.SetSliceContainerExpanded(true);
voxelLayer.SetSliceContainerVisibility(true);
//To stop the Voxel Exploration Dockpane activating use:
voxelLayer.AutoShowExploreDockPane = false;
//This is useful if u have your own dockpane currently activated...
//Use the SelectedVariableProfile to get the slices currently in the TOC
//via its associated volume
var volume = voxelLayer.SelectedVariableProfile.Volume;
var volumeSize = volume.GetVolumeSize();
//Orientation 90 degrees (West), Tilt 0.0 (vertical)
//Convert to a normal
var normal = voxelLayer.GetNormal(90, 0.0);
//Create the slice at the voxel mid-point. VoxelPosition
//is specified in voxel-space coordinates
//Create the slice on the respective volume
volume.CreateSlice(new SliceDefinition()
{
Name = "Middle Slice",
VoxelPosition = new Coordinate3D(volumeSize.X / 2, volumeSize.Y / 2, volumeSize.Z / 2),
Normal = normal,
IsVisible = true
});
//reset if needed...
voxelLayer.AutoShowExploreDockPane = true;
});
}
{
await QueuedTask.Run(() =>
{
//To stop the Voxel Exploration Dockpane activating use:
voxelLayer.AutoShowExploreDockPane = false;
//This is useful if u have your own dockpane currently activated...
//Normally, it would be set in your dockpane
if (voxelLayer.Visualization != VoxelVisualization.Volume)
{
voxelLayer.SetVisualization(VoxelVisualization.Volume);
}
voxelLayer.SetSliceContainerVisibility(true);
//Use the SelectedVariableProfile to get the slices currently in the TOC
//via its associated volume
var volume = voxelLayer.SelectedVariableProfile.Volume;
var slice = volume.GetSlices().First(s => s.Name == "Change Tilt Slice");
(double orientation, double tilt) = voxelLayer.GetOrientationAndTilt(slice.Normal);
//Convert orientation and tilt to a normal
slice.Normal = voxelLayer.GetNormal(orientation, 45.0);
volume.UpdateSlice(slice);
//reset if needed...Normally this might be when your dockpane
//was de-activated (ie "closed")
voxelLayer.AutoShowExploreDockPane = true;
});
}
{
await QueuedTask.Run(() =>
{
//Use the SelectedVariableProfile to get the slices currently in the TOC
//via its associated volume
var volume = voxelLayer.SelectedVariableProfile.Volume;
var last_slice = volume.GetSlices().LastOrDefault();
if (last_slice != null)
{
volume.DeleteSlice(last_slice);
}
//Delete all slices
var slices = volume.GetSlices();
foreach (var slice in slices)
{
volume.DeleteSlice(slice);
}
});
}
{
//Use the SelectedVariableProfile to get the sections currently in the TOC
//via its associated volume
var volume = voxelLayer.SelectedVariableProfile.Volume;
var section = volume.GetSections().FirstOrDefault();
var section2 = volume.GetSections().First(sec => sec.ID == my_section_id);
}
{
await QueuedTask.Run(() =>
{
if (voxelLayer.Visualization != VoxelVisualization.Surface)
{
voxelLayer.SetVisualization(VoxelVisualization.Surface);
}
voxelLayer.SetSectionContainerExpanded(true);
voxelLayer.SetSectionContainerVisibility(true);
//Use the SelectedVariableProfile to get the sections currently in the TOC
//via its associated volume
var volume = voxelLayer.SelectedVariableProfile.Volume;
var sections = volume.GetSections();
});
}
{
await QueuedTask.Run(() =>
{
if (voxelLayer.Visualization != VoxelVisualization.Surface)
{
voxelLayer.SetVisualization(VoxelVisualization.Surface);
}
voxelLayer.SetSectionContainerExpanded(true);
voxelLayer.SetSectionContainerVisibility(true);
//To stop the Voxel Exploration Dockpane activating use:
voxelLayer.AutoShowExploreDockPane = false;
//This is useful if u have your own dockpane currently activated...
//Normally, it would be set in your dockpane
//Create a section that cuts the volume in two on the vertical plane
//Use the SelectedVariableProfile to get the sections
//via its associated volume
var volume = voxelLayer.SelectedVariableProfile.Volume;
var volumeSize = volume.GetVolumeSize();
//Orientation 90 degrees (due West), Tilt 0 degrees
var normal = voxelLayer.GetNormal(90, 0.0);
//Position must be specified in voxel space
volume.CreateSection(new SectionDefinition()
{
Name = "Middle Section",
VoxelPosition = new Coordinate3D(volumeSize.X / 2, volumeSize.Y / 2, volumeSize.Z / 2),
Normal = normal,
IsVisible = true
});
//reset if needed...Normally this might be when your dockpane
//was de-activated (ie "closed")
voxelLayer.AutoShowExploreDockPane = true;
});
}
{
await QueuedTask.Run(() =>
{
if (voxelLayer.Visualization != VoxelVisualization.Surface)
{
voxelLayer.SetVisualization(VoxelVisualization.Surface);
}
voxelLayer.SetSectionContainerExpanded(true);
voxelLayer.SetSectionContainerVisibility(true);
//Create a section that cuts the volume in two on the horizontal plane
//Use the SelectedVariableProfile to get the sections
//via its associated volume
var volume = voxelLayer.SelectedVariableProfile.Volume;
var volumeSize = volume.GetVolumeSize();
//Or use normal (0, 0, 1) or (0, 0, -1)...
var horz_section = SectionDefinition.CreateHorizontalSectionDefinition();
horz_section.Name = "Horizontal Section";
horz_section.IsVisible = true;
horz_section.VoxelPosition = new Coordinate3D(volumeSize.X / 2, volumeSize.Y / 2, volumeSize.Z / 2);
volume.CreateSection(horz_section);
});
}
{
await QueuedTask.Run(() =>
{
if (voxelLayer.Visualization != VoxelVisualization.Surface)
{
voxelLayer.SetVisualization(VoxelVisualization.Surface);
}
voxelLayer.SetSectionContainerExpanded(true);
voxelLayer.SetSectionContainerVisibility(true);
//Use the SelectedVariableProfile to get the sections
//via its associated volume
var volume = voxelLayer.SelectedVariableProfile.Volume;
var volumeSize = volume.GetVolumeSize();
//180 degrees orientation is due South. 90 degrees orientation is due west.
var south = 180.0;
var num_sections = 12;
var spacing = 1 / (double)num_sections;
//Create a section every nth degree of orientation. Each section
//bisects the middle of the voxel
for (int s = 0; s < num_sections; s++)
{
var orientation = south * (s * spacing);
volume.CreateSection(new SectionDefinition()
{
Name = $"Circle {s + 1}",
VoxelPosition = new Coordinate3D(volumeSize.X / 2, volumeSize.Y / 2, volumeSize.Z / 2),
Normal = voxelLayer.GetNormal(orientation, 0.0),
IsVisible = true
});
}
});
}
{
await QueuedTask.Run(() =>
{
if (voxelLayer.Visualization != VoxelVisualization.Surface)
{
voxelLayer.SetVisualization(VoxelVisualization.Surface);
}
voxelLayer.SetSectionContainerExpanded(true);
voxelLayer.SetSectionContainerVisibility(true);
//Use the SelectedVariableProfile to get the sections
//via its associated volume
var volume = voxelLayer.SelectedVariableProfile.Volume;
var volumeSize = volume.GetVolumeSize();
//Make three Normals - each is a Unit Vector (x, y, z)
var north_south = new Coordinate3D(1, 0, 0);
var east_west = new Coordinate3D(0, 1, 0);
var horizontal = new Coordinate3D(0, 0, 1);
int n = 0;
//The two verticals bisect the x,y plane. The horizontal normal bisects
//the Z plane.
foreach (var normal in new List<Coordinate3D> { north_south, east_west, horizontal })
{
volume.CreateSection(new SectionDefinition()
{
Name = $"Cross {++n}",
VoxelPosition = new Coordinate3D(volumeSize.X / 2, volumeSize.Y / 2, volumeSize.Z / 2),
Normal = normal,
IsVisible = true
});
}
});
}
{
await QueuedTask.Run(() =>
{
if (voxelLayer.Visualization != VoxelVisualization.Surface)
{
voxelLayer.SetVisualization(VoxelVisualization.Surface);
}
voxelLayer.SetSectionContainerExpanded(true);
voxelLayer.SetSectionContainerVisibility(true);
//Use the SelectedVariableProfile to get the sections
//via its associated volume
var volume = voxelLayer.SelectedVariableProfile.Volume;
var volumeSize = volume.GetVolumeSize();
//make a diagonal across the voxel
var voxel_pos = new Coordinate3D(0, 0, volumeSize.Z);
var voxel_pos_ur = new Coordinate3D(volumeSize.X, volumeSize.Y, volumeSize.Z);
var lineBuilder = new LineBuilderEx(voxel_pos, voxel_pos_ur, null);
var diagonal = PolylineBuilderEx.CreatePolyline(lineBuilder.ToSegment());
var num_sections = 12;
var spacing = 1 / (double)num_sections;
//change as needed
var orientation = 20.0; //(approx NNW)
var tilt = -15.0;
var normal = voxelLayer.GetNormal(orientation, tilt);
for (int s = 0; s < num_sections; s++)
{
Coordinate2D end_pt = new Coordinate2D(0, 0);
if (s > 0)
{
//position each section evenly spaced along the diagonal
var segments = new List<Segment>() as ICollection<Segment>;
var part = GeometryEngine.Instance.GetSubCurve3D(
diagonal, 0.0, s * spacing, AsRatioOrLength.AsRatio);
part.GetAllSegments(ref segments);
end_pt = segments.First().EndCoordinate;
}
volume.CreateSection(new SectionDefinition()
{
Name = $"Diagonal {s + 1}",
VoxelPosition = new Coordinate3D(end_pt.X, end_pt.Y, volumeSize.Z),
Normal = normal,
IsVisible = true
});
}
});
}
{
await QueuedTask.Run(() =>
{
if (voxelLayer.Visualization != VoxelVisualization.Surface)
{
voxelLayer.SetVisualization(VoxelVisualization.Surface);
}
voxelLayer.SetSectionContainerExpanded(true);
voxelLayer.SetSectionContainerVisibility(true);
//Use the SelectedVariableProfile to get the sections
//via its associated volume
var volume = voxelLayer.SelectedVariableProfile.Volume;
foreach (var section in volume.GetSections())
{
//set each normal to 45.0 orientation and tilt
section.Normal = voxelLayer.GetNormal(45.0, 45.0);
//apply the change
volume.UpdateSection(section);
}
});
}
{
await QueuedTask.Run(() =>
{
if (voxelLayer.Visualization != VoxelVisualization.Surface)
{
voxelLayer.SetVisualization(VoxelVisualization.Surface);
}
voxelLayer.SetSectionContainerExpanded(true);
voxelLayer.SetSectionContainerVisibility(true);
//Use the SelectedVariableProfile to get the sections
//via its associated volume
var volume = voxelLayer.SelectedVariableProfile.Volume;
var sections = volume.GetSections().Where(s => !s.IsVisible);
//Make them all visible
foreach (var section in sections)
{
section.IsVisible = true;
//apply the change
volume.UpdateSection(section);
}
});
}
{
await QueuedTask.Run(() =>
{
//Use the SelectedVariableProfile to get the sections
//via its associated volume
var volume = voxelLayer.SelectedVariableProfile.Volume;
foreach (var section in volume.GetSections())
{
volume.DeleteSection(section);
}
//optional...
if (voxelLayer.Visualization != VoxelVisualization.Volume)
{
voxelLayer.SetVisualization(VoxelVisualization.Volume);
}
});
}
{
var mapView = MapView.Active;
await QueuedTask.Run(() =>
{
if (voxelLayer.Visualization != VoxelVisualization.Surface)
{
voxelLayer.SetVisualization(VoxelVisualization.Surface);
}
voxelLayer.SetSectionContainerExpanded(true);
voxelLayer.SetLockedSectionContainerExpanded(true);
voxelLayer.SetLockedSectionContainerVisibility(true);
//Use the SelectedVariableProfile to get the sections
//via its associated volume
var volume = voxelLayer.SelectedVariableProfile.Volume;
//get the selected section
var section = mapView.GetSelectedSections().FirstOrDefault();
if (section == null)
{
section = volume.GetSections().FirstOrDefault();
}
if (section == null)
{
return;
}
//Lock the section (Creates a locked section, deletes
//the section)
//if (voxelLayer.CanLockSection(section))
// voxelLayer.LockSection(section);
if (volume.CanLockSection(section))
{
volume.LockSection(section);
}
});
}
Target Platforms: Windows 11 Home, Pro, Enterprise (64 bit)