ConstructMultipatchExtrudeAlongVector3D Method (IGeometryEngine)

In This Topic

Creates a multipatch from the input polygon or polyline.

Syntax

Visual Basic (Declaration)
C#

Function ConstructMultipatchExtrudeAlongVector3D( _
   ByVal multipart As Multipart, _
   ByVal coordinate As Coordinate3D _
) As Multipatch

Multipatch ConstructMultipatchExtrudeAlongVector3D( 
   Multipart multipart,
   Coordinate3D coordinate
)

Parameters

multipart: The base geometry.
coordinate: The 3-dimensional coordinate.

Return Value

Returns the multipatch.

Exceptions

Exception	Description
System.ArgumentNullException	Geometry is null or empty.
System.InvalidOperationException	The geometry is not Z-Aware.

Remarks

Creates a multipatch from a base geometry by extruding the base geometry along an axis defined by the input 3-dimensional coordinate. The base Z-values of the geometry are preserved and the top Z-values are offset from the base by the Z-value of the input coordinate. The top geometry is also shifted by an offset defined by the X-value and Y-value of the input coordinate. The resulting extrusion is parallel to the xy-plane if and only if the base geometry is parallel to the xy-plane.

Example

Construct Multipatch via Extrusion of Polygon or Polyline

{
  // build a polygon
  string json = "{\"hasZ\":true,\"rings\":[[[0,0,0],[0,1,0],[1,1,0],[1,0,0],[0,0,0]]],\"spatialReference\":{\"wkid\":4326}}";
  Polygon polygonNew = PolygonBuilderEx.FromJson(json);

  // extrude the polygon by an offset to create a multipatch
  multipatch = GeometryEngine.Instance.ConstructMultipatchExtrude(polygon, 2);

  // a different polygon
  json = "{\"hasZ\":true,\"rings\":[[[0,0,1],[0,1,2],[1,1,3],[1,0,4],[0,0,1]]],\"spatialReference\":{\"wkid\":4326}}";
  polygon = PolygonBuilderEx.FromJson(json);

  // extrude between z values to create a multipatch
  multipatch = GeometryEngine.Instance.ConstructMultipatchExtrudeFromToZ(polygon, -10, 20);

  // extrude along the axis defined by the coordinate to create a multipatch
  Coordinate3D coord = new Coordinate3D(10, 18, -10);
  multipatch = GeometryEngine.Instance.ConstructMultipatchExtrudeAlongVector3D(polygon, coord);

  // build a polyline
  json = "{\"hasZ\":true,\"paths\":[[[400,800,1000],[800,1400,1500],[1200,800,2000],[1800,1800,2500],[2200,800,3000]]],\"spatialReference\":{\"wkid\":3857}}";
  Polyline polylineNew = PolylineBuilderEx.FromJson(json);

  // extrude to a specific z value to create a multipatch
  multipatch = GeometryEngine.Instance.ConstructMultipatchExtrudeToZ(polyline, 500);

  Coordinate3D fromCoord = new Coordinate3D(50, 50, -500);
  Coordinate3D toCoord = new Coordinate3D(200, 50, 1000);

  // extrude between two coordinates to create a multipatch
  multipatch = GeometryEngine.Instance.ConstructMultipatchExtrudeAlongLine(polyline, fromCoord, toCoord);
}

Requirements

Target Platforms: Windows 11 Home, Pro, Enterprise (64 bit)

ArcGIS Pro version: 3.0 or higher.

Reference

IGeometryEngine Interface
IGeometryEngine Members

Send feedback