Essential ArcGIS Linear Referencing vocabulary
The following sections describe the essential terms used in ArcGIS Linear Referencing.
Basic linear referencing terms
The following terms apply to basic linear referencing.
Event tables
Event tables contain information about assets, conditions, and events that can be located along route features. Each row in the table references an event, and its location is expressed as measurements along a route feature. There are two types of route event tables: point event tables and line event tables.
Route feature class
A route feature class is a collection of routes with a common system of measurement stored in a single feature class (for example, a set of all highways in a county). A route feature class differs from a standard line feature class in that, along with x- and y-coordinates, it also stores an m-coordinate (x,y,m).
ArcGIS Linear Referencing extension terms
The following terms apply to the ArcGIS Linear Referencing extension.
Activity
Often used in the context of edit activities, which are discrete capabilities supported by ArcGIS Linear Referencing to edit LRS Networks. The following edit activities are available in ArcGIS Linear Referencing: create route, extend route, realign route, reverse route, cartographic realignment of route, reassign route, and retire route.
ArcGIS Experience Builder
ArcGIS Experience Builder allows you to transform data into web apps and web pages with low or no code. Experience Builder in ArcGIS Enterprise includes a suite of Linear Referencing widgets and templates that support visualizing, querying, and editing LRS data.
Branch route
A route with a geometry that branches, so you cannot traverse the entirety of the route without re-traversing at least one portion of the route.
Calibration point
A point feature that defines the measure for a specific location on an LRS route. In ArcGIS Linear Referencing, calibration points define the measures on the routes. The measures between two calibration points on a route are derived by linear interpolation.
Centerline
A polyline feature that defines part (or all) of the geometry of an LRS route. Routes in ArcGIS Linear Referencing can have multiple centerlines, and routes in different networks can share centerlines.
Complex route
A route with a geometry that self-closes, self-intersects, or branches. Examples include loop routes, cul-de-sac routes, branch routes, and cloverleaf ramp routes.
Concurrency
A data scenario in which two or more routes in the same LRS Network share part or all of a centerline for their shape. Two routes with different centerlines are not considered a concurrency, even if they share the same geographic location.
Conflict prevention
Functionality that improves support for multiuser route and event editing.
Learn more about conflict prevention
Continuous network
A network composed of routes with continuous, uninterrupted measures that increase as you traverse the route. There are no equation points or stationing in a continuous network.
Derived network
A network generated from a line network. In a derived network, routes that belong to the same line are merged to create one route with a beginning measure of zero.
Learn more about derived networks
Engineering network
A network composed of multiple routes logically grouped in lines that can increase or decrease in measure as you traverse them. Equation points are used at locations where one route ends and another route begins. Events on engineering networks can span routes. In ArcGIS Linear Referencing, an engineering network is called a line network.
Equation
During LRS edit activities, gaps or overlaps in measures can be introduced between the adjacent routes in a line network. These points of discontinuity in measures between the routes are referred to as equations.
Event behavior
Event behavior refers to the configuration that defines how event measures and route associations respond to changes or edits in an LRS Network.
Learn more about event behaviors
Event lock
Event locks are a capability in ArcGIS Linear Referencing conflict prevention that allow a user to prevent other users from editing events for an event layer on a specific route. When events for an event layer on a route are locked, only the lock owner can edit those events on the route in the version the lock was acquired. Other users can acquire event locks for the same route on a different event layer if needed. To release an event lock, you must post the changes to the default version. If any event locks exist for a route, no one can edit the route until all event locks are released.
Internal event
Line or point events that reside in the geodatabase where the LRS is configured. When registered, an event feature class is created, and the shape of the feature is managed based on the route, measure, and start and end dates.
Line
A continuous logical grouping of one or more routes used for a measure system, specifically used in conjunction with a line network.
Line network
A logical grouping of routes to a line where the measure can increase or decrease monotonically. This type of network supports events that span routes and also supports equations.
Learn more about line networks
LRM
Acronym for linear referencing method, a method for defining measurements along linear features for the purpose of linear referencing. Examples of LRMs in the pipeline industry include continuous stationing in continuous networks and engineering stationing in engineering networks. Examples of LRMs in the transportation industry are State Mile Point, County Mile Point, or Project Stationing.
LRS
Acronym for linear referencing system, the method of storing geographic locations using relative positions along a measured line feature.
LRS data product
A .csv file or geodatabase table that is generated by transforming LRS data. The .csv file or geodatabase table can be used in a reporting solution of your choice, such as the reporting tools in ArcGIS Pro and others.
Nonline network
A collection of routes measured to a specific LRM.
Learn more about nonline networks
Project stationing
A system of stationing in which the starting reference station is established at the base of a project location, and all distances along the route centerline are measured from that point location.
Redline
A feature in ArcGIS Linear Referencing that can be added to the redline feature class and can be used to communicate modifications to the LRS Network.
Referent
A fixed location along a route that has a discrete measure value from which other locations are determined.
Referent offset
A fixed distance from a referent. The referent offset can be positive or negative.
Referent offset event
An event whose location is modeled as being a specific distance along a route relative to another event on the route.
Route dominance
Rules configured for each LRS Network that are used to determine which route is the primary, or dominant, route when there is a concurrency. Configuration of these rules is optional.
Route lock
Route locks are a capability in ArcGIS Linear Referencing conflict prevention that allow you to prevent other users from editing a route and events on a route while the route is being edited. When a route is locked, only the lock owner can edit the route and events on the route in the version the lock was acquired. To release a lock on a route, you must post changes to the route and events on the route to the default version.
Station
Reference points with numerical values that are placed along the horizontal measurement of a route, centerline, or baseline at a regular interval. Station numbers increase from west to east or south to north based on the cardinal direction of the overall network.
Stationing
The fundamental system of measurement used by surveyors. For highway or pipeline projects, a starting reference station is first established; then all distances along the route centerline are measured from that point location. Generally, the distance between two adjoining stations along a route is 100 feet. The first station located at the beginning of the baseline is 0+00 and the next station located 100 feet away from it is 1+00. For example, a station number of 10+34.05 depicts 1034.05 feet (10*100 + 34.05) away from the starting station.
Shared terms
The following terms apply to basic linear referencing and the ArcGIS Linear Referencing extension.
Asset
In linear referencing, an asset refers to a type of linear-referenced event that represents a physical object, such as a milepost, pipe segment, or pipe fitting.
Dynamic segmentation
Dynamic segmentation is the process of computing the map locations of events stored and managed in an event table along route features and displaying them on a map. The term dynamic segmentation is derived from the concept that line features need not be split (in other words, segmented) each time an attribute value changes—you can dynamically locate the segment.
Using dynamic segmentation, multiple sets of attributes can be associated with any portion of an existing linear feature independently of where it begins or ends. These attributes can be displayed, queried, edited, and analyzed without affecting the underlying linear feature's geometry.
Event
An event refers to data that is located by its association to a route and measure location. There are two event types. Point events have a single measure along a route, while line events have a start and end measure along a route. Events are typically modeled in a geodatabase with a field for the route ID the record references, as well as a measure field for the location on the route (two measure fields if it's a line event). Additional temporal information can also be modeled on the time frames to ensure that the event is valid.
An example of a point event is a crash location referenced to route Interstate 10 that occurred 10.53 miles down the highway. An example of a line event is the record of a speed limit of 65 mph on Interstate 10 from 0 miles to 20.5 miles.
In basic linear referencing, events are stored in event tables.
Line event
An event that represents a segment of a route from a start measure (or From Measure) to an end measure (or To Measure).
In the ArcGIS Linear Referencing extension, a line event can be configured to span multiple routes in a line network, which includes the starting route and ending route fields.
Measure
A value stored along a linear feature representing a location relative to the beginning of the feature, or some point along it, rather than as an x,y coordinate. Measures are stored as m-values on route vertices. Measures can be any unit of measurement, such as miles, meters, and time.
Point event
An event that represents a single point location on a route at a specific measure.
Route
A route is any line feature, such as a street, highway, river, or pipe, where measure values are strictly increasing or decreasing monotonically. Routes are polyline features that contain m-measures and are built on centerlines that are polyline features that do not contain m-measures.
In the ArcGIS Linear Referencing extension, a route is a line feature in an LRS Network.
In basic linear referencing, routes are stored in a route feature class.